AUSZER -> Products -> Meters -> Testers|
| EPA Access Control System |
3 arm turnstile gate
This kind of entrance control system is optimal for personnel separation.
Mode of operation:
Entrance: After approval by the test station the turnstile is moved by the operator's body pushing lightly against an arm.
Exit: The turnstile can be passed freely.
Pictograms display the respective walking directions while entering or leaving the EPA.
In case of power off the horizontal arm of this system folds down and is put back in position automatically after power on.
The automatic folding down of the arm provides a safety function as well as a possibility to let several persons pass at once, e.g. at the end of the working day.
Technical data: complete length of system ca. 900 mm
clear passage width: ca. 515 mm
personnel turnover: up to 20/min
power supply: 220-230 V / 50 Hz
power input: ca. 25 W
housing: stainless steel, brushed
The wrist strap and footwear tester is integrated in the housing of the turnstile. By touching of the sensing device, the connected wrist strap is tested and both ESD shoes are tested by separately through measuring electrodes that are installed in the contact mat. The tester automatically indicates, whether only wrist strap, only footwear or both is tested and uses the correct test range according IEC 61340. The measuring of the wrist strap on/or footwear can be compelled optional. Pictograms display the respective walking directions while entering or leawing the EPA.
Test voltage: 15V
Test range: 0,75-35MOhm (Wrist strap)
Test range: 0,75-100MOhm (footwear)
Shoe contact mat for entrance control system
with two electrodes for testing footwear
can be laid separately with black / yellow ramps or in combination with interlocking mats